How long does it take to install a garage or shed pad?

For a typical residential pad, the active work is 1 to 2 days. Allow 7 days before erecting a heavy structure on it, and 28 days for full strength.

How much does a garage or shed pad cost in Perth?

Garage and shed pad pricing in Perth typically ranges from $95 to $160 per square metre, depending on size, reinforcement requirements, finish and any associated work. Smaller pads often have a minimum job charge. Workshop slabs with heavy reinforcement requirements sit at the upper end. Pricing is indicative and subject to change based on material costs, project specifications and site conditions.

How thick should a garage or shed pad be?

Standard residential garage and shed pads are typically 100mm thick with appropriate reinforcement. Workshop slabs with heavier loading may need to be 125 to 150mm and may require additional reinforcement. We always pour to engineer's specifications where provided.

Can you pour a pad before the shed is delivered?

Yes — and that's the typical sequence. The pad needs to be poured, cured and ready before the shed installer arrives. We coordinate timing with your shed supplier so everything sequences correctly.

Do garage and shed pads need council approval?

Pads attached to a habitable building such as the garage of a new home are usually covered under the home's building approval. Standalone shed pads may or may not need approval depending on size, height and proximity to boundaries — local council rules vary across Perth. It is worth checking with your local council before construction.

Hairline cracking is normal for any concrete slab. We control it through proper reinforcement, joint placement and curing. Major structural cracking is rare with a properly installed pad.

Can I have a polished concrete garage floor?

Yes — polished concrete and honed concrete garage floors are increasingly popular for high-end builds and homeowners who want their garage to look as good as the rest of the home. We pour the slab and polish or hone on site.

YOUR LOCAL CONCRETING PARTNER

Concrete Footpaths Perth

Footpaths might be the most under-appreciated concrete on a property. They are walked on every day, they need to last decades, and a poorly laid path is a constant low-grade annoyance. At Colacrete we pour concrete footpaths across Perth — from straightforward grey pathways through to decorative exposed aggregate and liquid limestone walks — for homes, verges, and public areas.

What we do

Garden pathways — paths through gardens, side passages, and around the home

Verge crossings and footpath connections — the public footpath section across the verge, including council-compliant work

Service paths — paths to laundry lines, sheds, garden taps, gates

Step pathways — paths incorporating steps for sloped sites

Decorative pathways — paths in exposed aggregate, honed concrete or liquid limestone for premium properties

OUR FOOTPATH PROCESS

SCROLL RIGHT TO DISCOVER THE PROCESS
SITE VISIT AND MEASURE

Confirm path layout, dimensions, falls and finish. We usually receive the council approved specifications and quote to those specs.
SITE PREPARATION

Excavation and base prep. Remove existing path or grass, level the base, compact. Boxing with formwork to define edges and falls. Mesh reinforcement where required, particularly for paths that may carry vehicles (e.g., wider paths used as occasional access).
POURING THE CONCRETE

Concrete is delivered, poured, screeded and finished according to the chosen surface.
FINISHING THE CONCRETE

Concrete is cured and sealed if specified and required.

Footpath Finish options

Most footpaths are poured with a brushed (broom) finish on grey concrete — affordable, slip-resistant, durable. Other finishes are available where the path is part of a larger design statement:

Standard grey concrete with broom finish — most affordable, most common

Coloured concrete with broom finish — basic colour customisation

Exposed aggregate — decorative, textured, slip-resistant

Honed concrete — refined matte finish for premium pathways

Liquid limestone — limestone-look paths, particularly for coastal homes

Why footpath work matters more than people think

Falls and drainage. A footpath that holds water becomes a slip hazard and stains over time. Proper falls direct water to garden beds or drains.

Joint placement. Concrete moves slightly with temperature. Properly placed control joints prevent random cracking.

Surface finish. A footpath surface needs grip — particularly when it gets wet. Brushed finishes are the standard for safety reasons.

Connection points. Where the path meets steps, the home, or another concrete surface, the connection needs to be flush, level, and not a trip hazard.

Council-compliant verge work

Verge footpaths — the public footpath crossing the verge from the kerb to the property — are subject to local council requirements that vary across Perth’s local government areas. Width, thickness, finish and material specifications all need to comply with the relevant council’s standards. We work to those specs and handle the relevant approvals where required.

FAQ

Yes — verge work is on public land and is subject to local council approval. Specifications vary between councils across Perth. We can advise on what’s needed for your address.
‍ ‍
Concrete footpaths in Perth typically range from $80 to $150 per square metre for standard grey concrete with broom finish, with decorative finishes (exposed aggregate, honed, liquid limestone) sitting closer to $110 to $200+ per square metre.* Smaller jobs are often subject to a minimum charge. Council-compliant verge crossings may have specific cost factors based on local requirements.
For a precise quote, get in touch.
*Pricing is indicative and subject to change based on material costs, project specifications and site conditions.
Standard residential footpaths are typically 75–100mm thick. Verge crossings that may take occasional vehicle weight (e.g., where vehicles are parked across them) are usually 100mm with mesh reinforcement. The relevant council usually specifies whether reinforcement is required.
For a typical residential pathway, 1–2 days of active work. Allow another 7 days before regular use, 28 days for full strength.
Yes — sectional replacement is straightforward where existing concrete has cracked or sunk. Matching the colour and finish of older concrete is harder than starting fresh, but a close visual match is achievable.
Hairline cracking is normal for any concrete. We minimise it through control joints placed at appropriate intervals, proper reinforcement and good base preparation. Major structural cracking is rare with a properly laid path.
Yes — while grey concrete is the most popular choice, exposed aggregate, honed concrete and liquid limestone all work well for footpaths. The textured finishes also add slip resistance, which is a real benefit for high-traffic paths and paths that get wet.

Why choose COLACRETE?

We are a Perth-based concreting business with a family lineage in the trade going back to the 1990s, owner-operated by Eddie Colakovic. Colacrete is a proud HIA, MBA and CIA member.

You might also be interested in our concrete driveways and crossovers page (we often combine driveway and footpath work), our outdoor living areas page, or our wider range of Perth concreting services.

Get In Touch

If you're interested in working with us, complete the form with a few details about your project. We'll review your message and get back to you within 24 - 48 hours. Alternatively, get in touch on the details below.

hello@colacrete.com.au